30μm-1.5mm holiday detector 3-digit LCD porosity detector pinhole tester
Specification:
1. Applicable detection thickness: 30μm~1.5mm
2. Output High-voltage: 0.6kv~8kv (stepless and continually adjustable)
3. Direct indication of output high-voltage
4. Battery:12V/2800mA
5. Power consumption: about 6W
6. Volume of main detector: 220×130×88 mm
7. Back light
8. Instantaneous boot, and automatic shutdown
9. 3-digit LCD displays output voltage, and with all-touch panel
10. Alarm: Dual alarm with earphone and buzzer
Packing List
(1) Holiday Detector 1set
(2) High-voltage probe 1 piece
(3) Probe brush 2 pieces
(4) Connecting rod 1 piece
(5) Earphone 1 piece
(6) Backstrap 1 piece
(7) Fuse 2 piece
(8) Manual 1 copy
(9) Warranty Card and Certificate of Conformity 1 copy
(10) External packing box 1 piece
(11) Earthing wire 1 piece
(12) Charger 1 set
Note: Arc brush and circular probe are selectable (any length)
Attached Table for Detection Voltage
| Anti-corrosion Material | Thickness of Anti-corrosion Coating (mm) | Detection Voltage (KV) | Remarks |
| Epoxy Coal Tar | 0.2
0.4 0.6 0.8 |
4-5KV or self-defined | Perform according to standard (if provided) |
| Oil Asphalt | 2
3 5.5 7 9 |
11
15 18 20 24 |
|
| Polyethylene Adhesive Tape | Based on: 3249TC=V conversion formula
V: voltage; TC: thickness of anti-corrosion coating Perform according to SY4014-92 Acceptance Standard |
||
| Glass Lining | Determine detection voltage according to previous experience.
Generally, it is 8KV～20KV. |
||
| Other Anti-corrosion Materials | Detect voltage according to the design of design department or material insulation | ||
HODE-1001 Mainly used for petroleum pipeline(High voltage)
HODE-1002 Mainly used for the antisepsis of Pottery
HODE-1009 Displays holidays of antisepsis coating on two digital tube
