Digital Leakage Current 2500A AMP Clamp Meter Clamp Ammeter
Features:
Multifunction Measure AC leakage current, current, there-phase, voltage
Auto Power off
Large Clamp 80*80
Current Range: 0.0mA～2500A
With RS232
Auto Gear shift
200 sets storage
Specifications
| Function | Measure AC leakage current, current, there-phase, voltage |
| Power | 6V DC(LR6×4 alkaline dry batteries, continuously working for 12 hours) |
| Test Mode | Clamp CT, integral mode |
| Clamp Size | 80mm×80mm(can clamp electric cable of 80mm diameter, or 96mm×4mm flat cable and steel earth wires) |
| Current Range | 0.0mA～2500A |
| Current Resolution | 0.1A |
| Voltage Range | 0.00V～600V |
| Voltage Resolution | 0.01V |
|
Measurement Accuracy
(23℃±3℃, below 70%RH, measured wire at the center of the clamp)
|
0.00mA～300A: ±1.5%±3dgt |
| 300A～1200A: ±2%±3dgt | |
| 1200A～2500A: ±3%±3dgt | |
| 0.00V～600V: ±1.5%±3dgt | |
| Measured Wire Position | Measured wire at approximately the geometric center of the clamp |
| Data Storage | 200 sets, “FULLthe memory is full ” symbol indicate |
| RS232 Interface | With RS232 interface, download data to computer for analysis and management |
| Communication Wire | RS232 communication wire, 1.8m |
| Frequency | 50Hz ,60Hz automatic identification |
| Gear Shift | Automatic shift |
| Sample Rate | About 2 times/second |
| Line Voltage | Below AC 600V line measurement |
| Display Mode | LCD: 128dots×64dots; Display area: 43mm×29mm |
| Meter Size | Length 275mm × Width 145mm × Height 40mm |
| Backlight | Controlled by LIGHT key |
| Data Hold | “HOLD symbol appears” |
| Overflow | “OL symbol appears” |
| Automatic Shutdown | Automatically shutdown about 15 minutes after power on to reduce battery consumption |
| Voltage Detection | Low battery symbol appears to remind the replacement of battery when the battery voltage drops below 5.2V. |
| Weight | 1kg(with batteries and accessories) |
| Working Current | 50mA with enabled backlight; 25mA with disabled backlight |
| Working Temperature and Humidity | -10℃～40℃; 80%rh |
| Storage Temperature and Humidity | -10℃～60℃; below 70%rh |
| Insulation strength | AC 2kV/rms(between core and shell) |
| Safety Specifications | IEC1010-1, IEC1010-2-032, 2 class of pollution, CAT Ⅲ(600V) |
| Accessories | Main Unit: 1 pc; Test Line: 4 pcs (3 red, 1 black); RS232 Data Line: 1 pc; Disk: 1 pc; Battery: 4 pcs(Alkaline Dry Battery LR6); Meter Box: 1 pc; User Manual: 1 pc; Guarantee Card: 1 pc; Certification: 1 pc. |
