Dial depth gauge 0-100mm with rods
Part No: DI-601
The gauge is designed to measuring a depth from top bottom of bottomed holes, a depth of narrow grooves, a value of step height of stepped surfaces and a depth of types engraved in matrices.
Crankshaft deflection gauge crankshaft indicator 60-500mm
Part No:
DI-6201 60-300mm
DI-6202 60-500mm
The Tester is designed for For detecting bends in crankshafts; Pendulum weight for positioning dial gauge horizontally. It is also referred to as crankshaft gauge or crankshaft deflection tester. Ideal gage for checking bearing alignment or shaft deflection without dismantling the engine.
Inch Dial co-axial centering alignment indicator
Part No: CEIN-1002
Use this indicator to quickly center work pieces or fixtures on your boring and milling set-up.
Metric coaxial centering co-axial dial indicator
Part No: CEIN-1001
Has the care of the shaft rotation, the indicator is always faced with the characteristics of the operator.
Used for determining the relative position of the inner and outer centers of the workpiece and the center of the machine tool spindle.
Digital dial indicator hub cable concentrator 4 channel
Model: RS-6204 RS6104
The purpose of cabe concentrator or hub is to collect the data from multi-channel digital indicator and unit them as one into computur. and On the computure, it show different data from multi ichannel. It can collect 4 channels data, digital indicator 4 channel interface box
8 Channel digital dial indicator hub data collector
Model: RS-6108 RS6208
0-50mm Dial Indicator 0.01mm resolution 80mm diameter
Part NO: DI-058
Range: 0-50mm
Resolution: 0.01mm
Bezel: 80mm
Vernier depth gauge mechanical hardened depth caliper
Part NO: DG-130
Digital depth gauge small diameter rod for deep hole
Part NO: DG-172
Insidead of wide beam, DG-172 is small diamter cylindrical bar for measure the hole, Normally for small diameter holes. There are two holes on both side of base. The hole is used for fixing the gauge.
Digital depth gauge with double hooks 500mm 600mm 1000mm
Part NO: DG-152
The DG-152 series possesses two hooks at both side of tips. Can measure groove width and position of a groove, It can measure both side og grooves
Digital depth gauge with small rod contact point
Model: DG-162
This kind of gauge /depth gauge is manufactured for measuring the holes with small diameter or narrow grooves. The gauge is featured with slim rod at the top of it. With the hardened stainless steel.
0-2000mm Digital depth gauge electronic depth caliper
Part NO: DG-010
The caliper is featured with flat base on the end, the beam can be moved up and down and put into the hole to meaure. The flatness and straightness of base. The base width can be changed to customers request and OEM for different range
Electronic depth gauge with single hook 0-1000mm depth caliper
Part No: DG-120
The depth gauge is designed to meaure the depth of hole with moveable slide beam.
Tyre tread depth gauge 0-25mm
Part NO: DG-101
The Gauge is to measure tyre tread depth with high accuracy to provide data if the tyre is worn out and if the tyre should be replaced.
Telescoping gauge 8-150mm
Part NO: IG-106
The gauge is used to measure bores where inside micrometers will not fit. These ends are spring loaded and are held in any given location by a long screw that is operated via a knurled ring at the end of the handle. (Small hole gages operate similarly except that the long screw is terminated by a wedge that spreads the split-globe heads apart.)
Dail bore gauge with 1000mm 1500mm2000mm depth
Part No: BG-103
Provides different size of depth of 500mm, 1000mm, 1500mm 2000mm bore gauge
Digital bore gauge with 0.01mm resolution inside hole diameter
Part NO: : BG-311
The bore gauge are recognized as comparative instruments used for measuring the roundness of inside diameters, tapers and holes
Self Centering micro Dial bore gauge 0.001mm
Part NO:BG-205
The dial bore gauge 0.001 is one of the high accuracy measuring tools for checking size, straightness and taper of the cylinder, cam and crank bores
0.001mm Digital bore gauge
Part No: BG-213
Dial bore gauge is an instrument that measures the inner diameter of small holes, While the bore gauge is simple in concept, there are actually a number of different types of bore gauges used for a variety of application, dial type and digital type.
2-4-6 Setup block layout tools parallel blocks with holes parallel block
Part NO: PABL-10401
For larger layout and set up check jobs, these 2-4-6 Blocks cant be beat. Matched blocks are hardened and precision ground so all six sides are square to within 0.0003″. These blocks also feature five tapped holes and 18 untapped holes for clamping. Tapped holes are 5/8″ – 11″ Four sides are ground and hardened